20-40KA 2P AC SPD
製品説明
AC SPDは、AC 50/60HzのTT、TN-S、TN-C、IT、TN-CSなどの電源システムに最適です。<380V, installation om the joint of LPZ1 or LPZ2 and LPZ3, it adopts 35mm standard rail, there is a failure release mounted in the module of surge protection device. When the SPD fails in breakdown for over-hart and over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.
技術パラメータ | FSP-A | |||||
定格動作電圧 Un(V~) | 380V/220V | |||||
最大連続動作電圧 Uc(V~) | 275V | 320V | 385V | 385V | 385V | 420V |
電圧保護レベルアップ(V~)kV | 1以下。0 | 1.2 以下 | 1.8 以下 | 2以下0 | 2.2 以下 | 2.8 以下 |
公称放電電流 ln (8/20s)kA | 5 | 10 | 20 | 30 | 40 | 60 |
最大放電電流 lmax(8/20s)kA | 10 | 20 | 40 | 60 | 80 | 100 |
応答時間 (ns) | <25 | |||||
試験規格 | IEC61643.1、GB18802.1 | |||||
動作環境(摂氏) | -40度~プラス85度 | |||||
最大接続線 | 35mm2硬線/35mm2撚線銅線 | |||||
推奨接続線 | 16mm2硬線/25mm2撚線銅線 | |||||
インストール | 標準レール 35mm | |||||
外装材の材質 | 難燃性ナイロン | |||||







人気ラベル: 20-40KA 2P AC SPD、中国、メーカー、サプライヤー、工場、価格
あなたはおそらくそれも好きでしょう
お問い合わせを送る
























